SES Solid State Data Recorder - Compact Plus: Features

Key Features

• Size: 125mm(d) x 85mm(w) x 40mm(h) (excluding connectors)
• Weight: <0.6kg
• Case Construction: Aluminium Alloy Casing
• Standard Interfaces Selectable From:
• 4x RS422/485 Rx, 4x RS232 Rx
• 2x CAN bus (MilCAN Capable)
• IRIG B Timecode Input
• 2x ARINC429 Rx
• 4x A/D voice or other analogue input at up to 24-bit resolution and up to 48Ksps
• 8x Discrete I/O (TTL) or 4x Opto-isolated I/O
• 2x IRIG106 PCM (high speed serial, up to 5Mbit/sec)
• Recording Memory Media: PCMCIA Card (Types I and II)
• Max Recording Rate: 60 Mbit/s (from all sources)
• Power Requirements: 28V, 5W (Nominal)

Environmental Performance

• Operating Temperature: -40ºC to 85ºC
• Storage Temperature: -55ºC to 90ºC
• Temp/Humidity: Tested to MIL-STD-810F method 507.4
• EMC: Tested to Def-Stan 59-41 Part 3 DCE01, DCE02, DCE03, DRE01, DRE02, DCS01, DCS02, DCS03, DRS01, DRS02
• Vibration: Tested to MIL-STD-810F method 514.5 Procedure I (Category 12 - Jet Aircraft)
• Normal Acceleration: ±25g in all axes for 10s
• Shock Acceleration: Normal working with 3 impacts, ±40g peak in all axes 11m/s, terminal peak sawtooth
• Magnetic Influence: BS3G100 Part 2, Section 2
• Altitude: Up to 50,000ft
• Ingress: Tested to MIL-STD-810F Method 506.4 Proc III

SES Solid State Data Recorder - Compact Plus: Interfaces

Three circular military connectors are utilised, and are sealed against sand, dust and fluids. One of these connectors is always power, the other 2 connectors provide 20 I/O pins that can be used to select the required functionality of the S3DR-C+.

Wide input range power supply (11-32V, 5 Watt at 28V nom.) tested to BS3G100 and Mil-Std 704F, providing all power conditioning for internal supplies. (Power requirements depend on configuration, typically < 5W)

Hot-swappable solid state removable memory module (PCMCIA ATA Flash format).

Can be configured for "continuous loop" recording, or "one-off" continuous recording which can start from power-on, from discrete input or from an external trigger.

Interfaces

• 4x RS422/485 Rx, 4x RS232 Rx
• 2x CAN bus (MilCAN Capable)
• IRIG B Timecode Input
• 2x ARINC429 Rx
• 4x A/D voice or other analogue input at up to 24-bit resolution and up to 48Ksps
• 8x Discrete I/O (TTL) or 4x Opto-isolated I/O
• 2x IRIG106 PCM (high speed serial and up to 5Mbit/sec)